Are you trying to find a simple efficient gold recovery process?
Allow me to tell you about mineral processing equipment that is being used successfully all round the world, by large scale mining operations throughout to artisanal miners.
It is an alternative to using cyanide.
One of the very efficient and simple technology does not call for the use of dangerous chemicals.
Sure, using a cyanide solution for gold leaching is prevalent.
BUT, as Wired magazine from the United Kingdom points out…
The waste product from cyanidation is a disgusting and poisonous gloop that could float into rivers or toxin groundwater, killing wildlife and rendering landscape sterile. Huge pits of ore can be subjected to cyanide leaching in mines, with the runoff that a major environmental hazard which requires a substantial cost to render secure.
Rather than that, why don’t you use gravity?
GRAVITY SEPARATION IS COST-EFFECTIVE
Gravity separation of fine gold has been the working principle in many cost-effective mineral processing plants, all around the world.
That’s in both small and large-scale mineral extraction operations.
By way of instance, a little gold shaking table employs a low-capacity vibrating table for gold extraction.
Of course, it is not only for extracting gold. Mineral extraction employing a focusing table functions for regaining other precious metals and minerals too, such as all significant minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.
The Wave Table is perfect for cleaning up sluice box concentrates and separating gold from black sands, also. The Wave Table is perfect for cleaning up centers from Knelson, Falcon, Knudsen, STLBs as well as other centrifugal concentrators. (For large throughputs and high capacity mining/processing operations, especially for gold, we can help you with the most cost effective Centrifugal Concentrators.)
Larger plantations are utilizing Wave Tables to carry out final gold clean-ups and the’finishing’ of gold concentrates. This process eliminates the need to use cyanide or mercury.
Gold wave tables are lots better for your environment, as well as for workplace safety!
When you want to efficiently recover fine gold from gold bearing ore, then you will need a Centrifugal Concentrator. By way of example, a 1-3 TPH unit will take care of both alluvial and hard rock material.
In a huge mineral processing plant, you may use a Centrifugal Concentrator (known in some states as an STLB) to execute the key concentration. That’s, to regain all of the gold and heavy minerals from the ore feed.
This recovered material is known as the’concentrates’, or’cons’ for short.
THE SECONDARY CONCENTRATION
However, to really get’clean gold’, you have to then conduct the cons through the following process (a secondary concentrator), such as running the drawbacks over a Wave Table. By doing this, an upgraded fraction is regained that is a lot smaller in bulk, so it is easier to deal with.
When targets are cleaned up on a Wave Table, you create clean gold prepared to be smelted and turned into a gold bar for sale.
All this without using cyanide or mercury.
Another cyanide-free alternative is chemical leaching.
Gold can be pulled from run of mine ore as well as from concentrates using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system that GoldWaveTables.com can help you with.
CLS can be used for almost any metal but is particularly used for the retrieval of gold, silver and platinum group metals.
This incredible gold split apparatus comes in 3 versions covering all scales of performance. Regardless of the title, a gold wave table works to extract ANY thick mineral, where there is a specific gravity (density) differential between the valuable heavy mineral constituent and its own gangue or host substance. It also cleans grit and gold from the stripped carbon employed in CIP/CIL software.
The Greatest DEVICE
To quote Ian, a 30-year experienced from the mining and minerals sector,”I’ve personally had success with the Wave Table recovering very fine heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. As it’s so effective at recovering very nice particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will easily recover 5 micron gold from tailings. In mineral processing, it’s frequently that which you lose to tailings that’s as important as what you recuperate. I have discovered that the Wave Table is the ultimate device to check tailings for missing heavy minerals, such as gold. A simple test on your tailings will only take a few minutes. You will observe any heavy mineral lost in the tailings in a short time span. Such a test will obviate the need for lengthy fire assay turn around times.”
MICRON MILL WAVE TABLE
The largest model is that the M10 which does up to 8TPH (tonnes per hour) and the M8 model does up to 1TPH. The smallest version, the M5, is acceptable for smaller cleanups of 20 kgs per hour and can be used as a laboratory unit.
– Gold wave tables are a lot better for your environment
– Better for office safety too
– efficient and cost-effective.
When you’re looking for gold recovery plant for sale, check out GoldWaveTables.com
The Wave Table may be used at the smallest to the largest gold mine. They may be used for full scale production functions, or simply as a cleanup or immersion apparatus in the golden room.
The Wave Table has become increasingly being used to recover gold from evaluation samples of a few kgs in size and upward. This kind of majority testing is quick and the quantitative outcomes mean that you are not just relying on fire assays or AAS, particularly in visible free gold deposits, even if the gold is ultra fine (5 to 20 microns).
Visit https://GoldWaveTables.com to learn more today.
We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.
Also learn more about Mineral Processing Plant here.